ServoCity Shark-9 Servo Gearbox (1.26 Sec/60°, 8 rpm, 4248 oz-in, 280°) (Feedback Mode)

Title Default Title
Qty:

Description

  • ServoCity Shark-9 Servo Gearbox (1.26 Sec/60°, 8 rpm, 4248 oz-in, 280°) (Feedback Mode)
  • Powered by Hitec's premier brushless, titanium-geared servo
  • Features a 9:1 external gear ratio for enhanced torque and precision
  • Offers multiple mounting options with M4 threaded holes
  • Provides both feedback and continuous modes
  • Boasts a maximum rotation of 280° and a stall torque of 4248 oz-in

The ServoCity Shark-9 Servo Gearbox (1.26 Sec/60°, 8 rpm, 4248 oz-in, 280°) (Feedback Mode) is powered by Hitec's premier HSR-M9382TH brushless, titanium-geared servo. The gearbox features a 9:1 external gear ratio, designed to reduce the range while simultaneously enhancing the torque and precision nine times over. The servo, housed within the gearbox, directs the load to a steel hub-shaft, which is supported by a pair of ball bearings. This design effectively safeguards the servo from any axial loads.

The design of the gearbox offers a multitude of mounting options, thanks to the M4 threaded holes on each side, which are arranged in a grid pattern for compatibility with the goBILDA® system. The hub located at the top of the gearbox provides threaded holes for fastening. Alternatively, one may choose to fasten directly to the aluminum output gear using M4 hardware and standoffs or spacers. The 8 mm REX bore of the hub-shaft can either drive an 8 mm REX shaft or serve as a wire pass-thru.

View more

  • 1x ServoCity Shark-9 Servo Gearbox (1.26 Sec/60°, 8 rpm, 4248 oz-in, 280°) (Feedback Mode)

  • Wire Length: 300 mm / 11.81 inch
  • Gear Ratio: 9:1
  • Voltage Range: 6V - 8.4V
  • No-Load Speed (6.0V): 1.53sec/60° (6.5 RPM)
  • No-Load Speed (7.4V): 1.26sec/60° (7.9 RPM)
  • Stall Torque (6.0-7.4V): 4248 oz-in (306 kg.cm)
  • No-Load Current (6.0V): 260 mA
  • No-Load Current (7.4V): 270 mA
  • Stall Current (6.0-7.4V): 2700 mA
  • Motor Type: Brushless DC
  • Direction with Increasing PWM Signal: Counter Clockwise
  • Max PWM Range: 800-2200 μsec
  • Travel per μsec: 0.20°/µsec
  • Max Rotation: 280° (0.77 Turns)
  • Pulse Amplitude: 3 - 5 V
  • Deadband Width: 1 μsec
  • Wire Gauge: 22 AWG
  • Intellectual Property: Patented
  • Connector Type: 3-Pos TJC8 Servo Connector [MH-FC]
  • Weight: 225 g