Description
- Lynxmotion SES-V2 LED Board w/ 3s 11.1V 4000mAh LiPo Battery
- LSS mounting pattern
- LED lighting for your Lynxmotion SES V2 projects
- Two power options: LSS bus or 3S Lithium balance port
- Operating voltage: 12V
- White ~308.8 lumen general purpose LED
- 4000mAh 11.1V, 3S LiPo battery
The Lynxmotion SES-V2 LED Board w/ 3s 11.1V 4000mAh LiPo Battery is intended to add lighting to your servo erector set (SES) v2 project and include a battery for convenient powering. The module is meant to be connected to the standard mounting of an Lynxmotion Smart Servo (LSS) Motor and can be added to the serial bus.
Like the LSS which can be operated over a range of input voltages, this LED module is meant to operate between 6 V and 12 V. The module can be powered one of two ways where the onboard switch selects which of the two sources powers the LED:
Four-pin LSS bus (Tx, GND, 12V, Rx)
Four-pin, three cell Lithium balance port (3 individual cells = 11.1V)
- 1x Lynxmotion (LSS) - LED Module
- 2x 2-56 x 1/4 in Phillips Pan Head Screw
- 1x 3s 11.1V 4000mAh LiPo Battery
Lynxmotion (LSS) - LED Module
Websites
Similar Item
Lynxmotion (LSS) - LED Module & 3s 11.1V 3300mAh Li-ion Battery
Lynxmotion (LSS) - LED Module
- Input Voltage: 12 V Nominal (6.4 V to 18 V)
- Connections:
LSS Connector (Molex 99990988)
Lithium balance port (JST B4B-XH-A)
- LED: Everlight 37-21S (~38 lumen white LED)
- Current: ~100 mA.
Battery
- Voltage: 11.1V
- Number of cells: 3
- Capacity: 4000mAh
- Chemistry: Lithium Polymer
- Connector: XT60
- Size (excluding wiring): 135 x 42 x 25 mm / 5.31 x 1.65 x 0.98 in